Good afternoon, for this New Year's season I decided to make a convenient navigator article on all existing ways crochet the Christmas tree. We will learn to knit a variety of Christmas trees with our own hands. Let's start gradually - first the simplest trees, then more complicated ones. You will be able to tie flat and crochet voluminous Christmas trees. New Years with decorations. Forest, snowy. You will find a variety of models of knitted Christmas trees in this article. And also I will give clear explanations for each model. AND step-by-step master classes will give an understanding in what sequence and what needs to be done to get a beautiful crocheted Christmas tree.
Christmas trees with a HOOK
Based on the CONE.
Here in the photo below we see a Christmas tree in the form of a crocheted cone. Here comes the usual circular knitting with a gradual decrease in the number of columns in a row. Therefore, the circle keeps getting narrower and narrower - there are fewer and fewer columns in the circle. And gradually we narrow to the top.
The decrease in the number of columns is due to the fact that we are in several places in our circular row do DOUBLE LINING... That is we knit two columns together- we hook on the first one (and do not stretch the thread into it, but leave it on the hook), and immediately hook the second column onto the same hook - and only then TWO columns on the hook do the broach.
Therefore, we divide the circular row into 6 sectors - like a cake into 6 pieces is divided in a circle. And at the beginning of each sector, we knit two stitches together. Decreasing the stops one at a time in each of the 6 sectopods will give us a narrowing of the cone AT ALL PLACES AT THE SAME TIME. And the tree will taper evenly on all sides.
This is how it looks in practice….
For instance, you have only 54 columns in the first knitting circle (in the very bottom row of the future tree) - we divide by 6 (these are sectors) - we get 9. So our sector consists of 9 columns.
And now we knit 4-5 rows just straight crochet - without subtracting anything. Round. And then in the first decreasing row we knit EVERY NINTH AND EIGHTH COLUMN TOGETHER.
Then we knit one row again without decreasing.
Then in the second diminishing row - we still have the same most 6 sectors- but already in each sector we have not 9 columns, but only 8. And therefore we knit together every EIGHTH AND SEVENTH column.
We knit one row again without subtraction.
And in the third decreasing row - we already have only 7 columns in the sector. So we will knit together every SEVENTH and SIXTH stitches.
The principle of knitting a conical tree with your own hands, as you can see, is SIMPLE.
If you wish, you can use threads of different textures - fluffy, knotty - to get a pellet with an interesting knitting pile.
You can also alternate the color of the threads in each of the rows - dark green and light green.
Or you can knit not just STEAM (simple crochet posts), but use an embossed CONVEX KNITTING PATTERN - for example, BUMPS, as in the right photo below.
You can knit a Christmas tree WITH RELIEF - as in the photo below. Here the tree is knitted not from bottom to top, but from top to bottom. And as we see in the photo, embossed circular RIBS appear on the tree because we are starting a new circular row, sticking a hook not to the top of the bottom row, and at the base (bottom) of this row or even in the previous row. And the row itself remains sticking out above the surface of the knitted Christmas tree.
At the end of the work, you can decorate the knitted Christmas tree with beads or beads. By simply pulling them through knitting on a thread with a needle. Here's how it is done in the photo with a crocheted Christmas tree below.
How to make a TIGHT BOTTOM
at a Christmas tree knitted with a cone.
When you knit the cone, you will need to crochet the ROUND FLAT BOTTOM of our knitted Christmas tree. It is knitted simply in a circle - with the addition of columns evenly - one at a time in 6 knitting sectors.
To add a table, you just need to knit one and one more column in one loop of the bottom row.
The knitted round bottom of the tree must be reinforced with cardboard so that it does not bend with a ball. So that the tree keeps the bottom of the flat, even shape of the bottom.
After working with the bottom, we fill the tree with padding polyester or cotton wool and sew the bottom - along the edges of the cone - with a crochet or needle.
What else can be done
with cone tree
(crochet lace).
But this is not the whole work. Perhaps you will not like the too straight and smooth surface of the conical Christmas tree - then let's TIE IT with lace crochet - colored threads.
Here in the photo below you can see that the finished cone of a knitted Christmas tree already stuffed with padding polyester was taken and TIED with red and white circular rows.
How it's done?
We take in our hand a ready-made conical tree - already thick, stuffed with cotton wool. Hook. And a ball of red thread. We stick the hook into the side of the tree (in any row, any place). And with the end of the hook, which looked out of the tree, we hook the RED THREAD from our ball. They picked it up and held it out - and went to knit in a circle - picking up our Christmas tree by the side. Along the selected row. We picked up and knitted a column, picked up and knitted - we go in a circle around the side of the Christmas tree - and we get a red binding with columns - as in the photo above.
We repeat the same with WHITE threads in another row of the conical tree.
Cone herringbone lace trim
(strapping with petals).
In exactly the same way (as described above), the LACE-UP of the conical tree in the photo below is made.
Here, too, at first they made straight conical silhouettes of Christmas trees, stuffed them with padding polyester, and then took a hook and threads in their hands. They stuck the hook into the side of the finished tree - in any row - and began to tie it with single crochet (first row), walking along the selected row of the conical tree. And then this harness once again in a circle already with PETALS - where 6 double crochets are immediately knitted into one loop - and it turns out beautiful round petal (spruce foot). We knit one small stitch between the petals.
And also the DENSITY OF LACE TIPS may be different... That is, here in the photo above between the lace petal rows the body of the cone itself shines through - that is, the lace binding is done in every 7th row of the cone
But - in the photo below - the lace rows are more tightly pressed together, so that the cone is not visible and it seems that the whole tree consists of petals. Here, the lace tie is done in every 4th row of the cone.
You can knit lace petals only at the bottom of the Christmas tree - as it was done on a New Year's craft crochet with the photo below.
And note the lace petals on the conical tree can be placed with a CHESS.
And you can only make THREE ROWS OF BINDING as in the photo below. And fill the empty aisle with bright beads and curly sequins.
And one more thing I want to draw your attention to ...
Petal ears can be of very different shapes. The more columns we knit in one hole in a row - the wider and sagging "ear" is obtained from a crocheted Christmas tree. Here in the photo below we see a lace ear with 12 columns, with two high ones.
Your paw ears may even be too big and wide. Overshadowing the tapered base itself. And then your Christmas tree may look like this - as in the photo below. Here, each row of strapping has an EDGE with gold threads - just strapping with single crochets - along the edge openwork clawed rows.
And on crocheted Christmas trees, the ears can have a DIFFERENT SHAPE - for example, pointed as in the photo below. The knitting pattern of a patterned lace clove can be INTERROLLED from the pattern of any crocheted snowflake. On our site there is article on knitted snowflakes- it will do, there are many simple schemes.
And IN THE SAME METHOD, you can make just such a Christmas tree - the photo below. See? Here, rows of petal strapping (green threads) alternate with rows of lace strapping (white threads).
- Here, first we knit a green simple cone - the basis of the future tree. According to the method described at the very beginning of the article.
- Then we fill the cone with cotton wool, knit the flat bottom of the Christmas tree - close the bottom of the Christmas tree (see the master class above).
- And after that, with green threads, we knit the PETAL TAPE of the Christmas tree in 6 rows (in a circle), evenly distributed along the height of the cone.
- And then between the petal rows we make a LACE WHITE binding with an openwork pattern of your choice.
You see how interesting it is. One and the same way CONE TREE WITH A HOOK - can give such a variety of options for knitted Christmas trees.
Christmas tree crochet master class
PETAL LEAF method.
And here is another beautiful way to tie a Christmas tree with embossed round petals. Here mating does not go in a circle.
Here we first create a triangular canvas - which we fold into a conical bag, form a Christmas tree.
Here is a master class where the principle of knitting such a canvas is shown. This tutorial uses a small canvas, just a few petals - for a very small Christmas tree. Of course, you can choose the number of tiers of the tree yourself, and based on this, decide what size of canvas is needed for this.
Here's how it works. The first stage, we just create a narrow mesh - this will be the base on which the first row of petals will hook. A chain of air vents - and there are double crochets on it. The columns are alternating - two columns in a row, then one air vent (skip from below and crochet one from above), again two columns in a row, and again we skip one air vent from above and below.
And now we will knit the first petal row. In those places where we had two columns close - here between them, in this narrow gap we knit a petal - we just knit 12-14 columns into this gap - and they themselves move apart in a circle from tightness, forming a round petal.
Dale (photo below) over this first petal row, we knit again a row of the same base grid (as from the first photo) - two columns next to each other and between them we skip the air loop from above, and from the bottom we skip the loop of the lower row.
And again, in this new base mesh, we knit the petals in the same way - in each gap between the columns standing next to each other.
As the rows move towards the top of the tree, the canvas should narrow. Therefore, in each row (or in every second row) of our fabric, we should knit one petal less. To do this, the base grid for this reduced row must be made shorter by one pair of columns - at the edge.
Christmas tree crochet
Knitted rectangles.
And here is another tricky way to crochet the ears-paws of the Christmas tree. Here they will be rectangular.
Here, each petal is a crocheted RECTANGLE. First we knit a CHAIN OF AIRS of 7 loops + 2 on the rise - along which 7 single crochets are knitted, then a turn to the return line and another row of 7 columns, again a turn to the return line and another row of 7 columns. And from the same place where our hook stopped with a loop on it, WE AGAIN MAKE A CHAIN OF AIRS from 7 loops + 2 to rise, and repeat along it the same rows of 7 columns - here, here, back.
And as a result, we have in our hands a garland of rectangular petals - as in the photo below.
By the same principle, you can link long narrow petals-stripes for the Christmas tree. Here we knit a longer chain of airs - and along it we knit only one row of stitches. It turns out a furry Christmas tree-broom crocheted.
Laminated Christmas trees
How to crochet.
Puff method No. 1 - FROM CONES.
You can knit a Christmas tree in this way. Take threads of two shades of green and tie several cones - first a small one (for the top), then a larger cone, even larger in size, and again and again. With alternating colors. After that, we just put the cones on top of each other - like a pyramid - and we get just such a crocheted puff herringbone (as in the photo below). You can leave straight edges at the cones, or you can tie the edges of each cone with wavy lace (alternating columns with two crochets (in the petal) and single crochets (between the petals).
LAYERED method number 2 - from pancakes.
In the same technique of the LAYERED FIR-TREE, you can use not cones, but crocheted flat "pancakes". Like these ones. We knit several pieces of them - each is slightly larger in size than the previous one.
And then we collect a Christmas tree from them by folding them in a pile - from large to small. Some knitted pancakes can be made of white threads, and then you get the effect of fastened Christmas tree legs.
Puff method number 3 - FROM RINGS.
We can also make a puff tree. by tying rings. We tie the rings with a crochet - we work with them as if we were holding a ring not made of plastic, but a familiar chain of air loops, closed in a circle.
The rings do not have to be of different sizes. You can take identical rings, but tie each with a different number of rows of posts.
Then all the rings are collected on a rod (a pencil, also tied with single crochet columns).
Or you can just put all the rings on top of each other - fix it with threads (sew the ring to each other). And put the bottom hole on the bottle cap - as in the picture below.
And you can add a snowy white trim for the edges of the round and the top of the knitted Christmas tree. The result is a snowy effect.
LAYERED method №4 - CUCHERY.
We all know how to knit curly pancakes. It's simple. If, when knitting a pancake in a circle, add not the prescribed number of columns, but twice as many, then our pancake will begin to curl around the edges - to give a wave. And this is good. This is another way to crochet a beautiful Christmas tree.
The more stitches you add in a circle, the steeper the wave will be around the edge of your knit. 
These curly pancakes can be collected in a curly tree. The beginning of these pancakes can be FLAT, or it can be in the form of a cone (as in the photo below). You see - each pancake has a convex center in the form of a hat. This is because we first knitted a cone (we added a few stitches in a circle), and then sharply increased the number of stitches and our knitting became flat in a circle (like a hat brim), and then it turned into a steep wave.
Then we put these curly pancakes in a herringbone. So that the tree has a solid core, you can insert a solid object into the bulge of each pancake (the neck of a household item, a medicine cap - that is, give a solid filling to our pimples-tops.
Very lush Christmas trees are obtained if you make a lot of additional posts and many layers of such rolled pancakes.
Knitted Christmas tree pendants
Like Christmas toys crocheted.
You can crochet small flat trees. Decorate them with beads, rhinestones, sequins and sew on a loop on top so that such a Christmas tree knitted with your own hands could be hung on a spruce branch.
A flat herringbone can be DOUBLE-LAYER - have a front part and a back part. The parts sewn together give a cavity between them, which can be filled with cotton wool or synthetic winterizer - you get a chubby crocheted Christmas tree (as in the photo below).
The direction of knitting can be straight - as in the diagram above. Or we can knit oblique symmetry of the rows. To do this, we simply change the direction of the row in the middle of the tree - along its central axis, as in the photo below.
We begin to knit such a tree - from the bottom up. We crochet a leg - just 6 air + 2 to climb to a new row. Then the 2nd row - 6 columns, and the 3rd row - 6 columns. It turned out a herringbone leg in the shape of a rectangle
Then you need to make SEMI-CIRCULAR on this leg (in the form of a mushroom cap). Just knit half a circle - the center of the circle will be the middle of our newly knitted leg. This half of the circle and will set the direction for all the other rows of the Christmas tree- will make these rows break in the center - by 2 slopes of the tree.
A simple crocheted herringbone made of thick aluminum wire. From the aluminum wire we twist the shape of the SNAKE in the form of a herringbone. And we tie it with a crochet - just single crochet. It's like our wire is the first row of knitting, and we just crochet it under the bottom. Nothing complicated.
An excellent exercise for children who are just learning to hold a hook in their hands - it is much more convenient for children to vase on a wire - it is solid, it is convenient to hold it in their hands and children quickly get used to vase on such a comfortable simulator. No psychos and hysterics.
Here are the ideas for those who want to crochet a Christmas tree with their own hands. Now you can choose a task that is feasible in your hands, suitable in terms of the number of threads and time costs.
Good luck and good hook.
Olga Klishevskaya, specially for the site ""
If you like our site, you can support the enthusiasm of those who work for you.
Happy New Year to Olga Klishevskaya, the author of this article.
Knitted herringbone.
To knit and decorate the Christmas tree, we need: Yarn Art Christmas yarn (2-2.5 rolls of 50 g each, depending on how high your Christmas tree will be), hooks (I used a 1.9 hook for the conical base of the Christmas tree and knitting bottom and hook 2.25 for knitting Christmas tree twigs), synthetic filler, old unnecessary disc, rhinestones, ribbons, sequins, large beads and other types of materials for decoration.
So let's get started.
1 row: we make a sliding loop and knit 3 air loops and 9 CCHs (crochet stitches) into it.
Attention: from the second row, knit CCH not under the entire loop of the chain of the previous row, but under the back wall, so that lines appear along the canvas.
2nd row - knit 3 air loops in a circle * CCH, 2CCH in the next loop * 5 times from * to * and then another CCH in the same loop, from where 3 air loops => 16 CCH.
3 row - 3 air loops, * 2 CCH in the next loop, CCH, CCH * and then CCH in the same loop, from where 3 air => 21 CCH
4th row - 3 air loops, CCH in each loop, connect.
We continue to knit the cone of the Christmas tree as follows:
5 row - 3 air loops, * CCH, CCH, 2CCH in the next loop * and alternate and then CCH in the same loop, from where 3 air loops and connect => 28 CCH.
6 row - 3 air loops, CCH in each loop.
7 row - 3 air loops, * CCH, CCH, CCH, 2CCH in a loop *, and alternate and then CCH in the same loop, from where 3 air loops and connect => 35 CCH.
8 row - 3 air loops, CCH in each loop.
9 row –3 air loops, * CCH, CCH, CCH, CCH, 2CCH in a loop *, and alternate and then CCH in the same loop, from where 3 air loops and connect => 42 CCH.
10 row - 3 air loops, CCH in each loop.
11 row - 3 air loops, * CCH, CCH, CCH, CCH, CCH, 2CCH in a loop *, and alternate and then CCH in the same loop, from where 3 air loops and connect => 49 CCH.
12th row - 3 air loops, CCH in each loop.
13 row –3 air loops, * CCH, CCH, CCH, CCH, CCH, CCH, 2CCH in a loop *, and then alternate and then CCH in the same loop, from where 3 air loops and connect => 56 CCH.
14 row - knit according to the CCH pattern to the end of the row.
15 row - 3 air loops, * CCH, CCH, CCH, CCH, CCH, CCH, CCH, 2CCH in a loop *, and alternate and then CCH in the same loop, from where 3 air loops are connected => 63 CCH.
16 row –3 air loops, CCH in each loop.
17 row - similarly add 7 loops evenly => 70 CCH.
18 row - knit according to the CCH pattern to the end of the row.
19 row - similarly add 7 loops evenly => 77 CCH.
Row 20 and Row 21 - knit in the CCH pattern to the end of the row.
22 row - similarly add 7 loops evenly => 84 CCH.
23 row - knit according to the CCH pattern to the end of the row.
Those. if you paid attention, from the 5th row, there are almost constant increases in 7 loops through the row. The number of loops is always a multiple of 7, so the increments are uniform. I have brought increases up to 23 rows. if you need a higher Christmas tree, you can continue in the same way as much as you like :). As a result, we get a blank cone for knitting branches.
We proceed to knitting the twigs.
The twigs consist of 2 rows. We will impose them on every third row of the cone-shaped base. The first branch is knitted on the second line from the top of the tree. Please note that in the first row we knit columns with 2 yarns. This is necessary so that our branches overlap the base of the cone as much as possible, i.e. we, due to the columns with 2 crochets in the first row of branches, make the branches longer.
1 row - knit by the front walls of the 2nd row of the cone. Join with the help of a connecting post any loop of the 2nd row of the cone, * 3 air loops, CC2H, 3 air loops, 2CC2H * in the same loop, 1 air loop, skip the next 2 loops and knit again * 2СС2Н, 3 air loops , 2СС2Н, 1 air loop * and until the end knit such a shell through 2 loops in the third, join with a connecting column to the top of the column of 3 air loops. The result should be 6 shells.
2nd row - connect to the arch (we move into the arch with the connecting loops) and knit * 3ССН, 3 picot out of it (the appearance will be like a card cross), 3 СН, 1 air loop *, from the next arch the same and so on until the end of the row , break the thread.
Here in the photo you can see how we knit the first row of twigs
Thus, the first row of branches is ready. Now we cut off the thread and crochet it to the base on the seamy side and pull it inside out together with the thread of the beginning of work, fix it there.
We skip 2 rows of the base of the cone and on the third we begin to knit branches again.
Only when knitting the 2nd and subsequent rows of twigs, I knit * through 2 loops in the third, through 2 loops in the third, after 3 into the fourth *, so alternating. Because if you always knit through 2 into the third, then too much excitement. But that's how anyone likes it. You can choose for yourself.
As a result, we already have a Christmas tree without a bottom.
Let's start knitting the bottom:
The bottom for the Christmas tree is a flat circle. We start with 6 sc and then follow the rules of a flat circle. We increase the number of loops to the required one (in our case - 84 loops, since there are 84 loops in the warp of the cone) and then we knit another 1-2 rows of 84 СБН without increasing the number of loops.
The diameter of the flat circle will be approximately the same as the diameter of the disc. That's how it works for me. If your knitting density differs, then you can always either reduce the disc in diameter, or cut out a circle from a plastic folder, which we will then go to the base for a more stable position of the tree.
When the flat circle is ready from the seamy side, we attach a disk or a plastic circle and connecting loops (we insert a hook under the chain of a flat circle and a chain of the base of the cone, grab the thread and pull it through all the loops, and so we repeat in a circle). We combine the circle and our Christmas tree. Make the connections not to the very end, because it is also necessary to fill the tree with synthetic filler. Therefore, when about 1/5 remains, I fill the tree with synthetic filler and then, to the very end, I attach the lower base to the tree.
I usually decorate with rep or satin ribbons, sequins, sewn on rhinestones.
Knitted Christmas trees. Knitting needles. Hook. Materials: wool, cotton, beads, decorative beads, filler (synthetic winterizer, holofiber, cotton wool). Embroidery. The average size of the trees is 10-12 cm.
Description:
All Christmas trees are connected according to the same principle.
Main pattern: front surface (front loops in front rows, purl loops in purl rows).
Cast on 45 stitches.
1-8 row: front surface.
9 row: edging, 1 knit, 2 knit stitches, * 2 knit loops, 2 knit stitches *, hem.
10-16 rows: front surface.
17 row: edging, * 2 loops together face, 1 front *.
Rows 18-24: front surface.
25 row: edge, 2 loops together, face - to the end of the row.
26-30 rows: front surface.
Row 31: edging, * 2 loops with the face, 1 front *, 2 loops with the face.
32 row
Row 33: edging, * 2 loops together face *, edging.
34 row(purl): purl loops.
35 row: crochet the thread through the remaining loops, pull tight, secure the thread.
- It turned out to be a "triangle". Sew the sides of the triangle.
Advice: so that the edges of the triangle do not bend, from the wrong side, carefully iron the canvas through wet gauze. It will be much easier to sew.
ATTENTION! If you want to knit the tree more elongated, increase the number of rows of the front surface (that is, knit more rows without decreasing).
- The Christmas tree can be made flat, then the bottom is sewn together.
The Christmas tree is decorated with multi-colored balls, the "trunk" is sewn at the bottom.The Christmas tree can be made voluminous:
The sewn triangle can be filled with padding polyester, cotton wool, any filler. A round bottom is sewn underneath. It can be felt, thick fabric. You can crochet the bottom (see description below).Here are "step-by-step" photos of making a Christmas tree-"watermelon":
Alternating green stripes - the "crust" of the watermelon. We embroider "seeds" with black wool on a red field. Cut out a blank for the "inner" Christmas tree from thin foam rubber. Sew the foam rubber tree over the edge with a thin thread. The crown can be made tilted right away if you want your Christmas tree to be fashionable now in shape. We put a knitted Christmas tree on a foam rubber tree, fix it with pins, sew the edges with a thin thread. We carefully cut off the bottom foam rubber edge so that it does not "look" out. Crochet the bottom. We close 3 air loops in a ring, knit in a circle with single crochet.First, in each column of the previous row we knit 2 single crochets, as the diameter of the circle increases, you can make additions less often.
Sew on the bottom, decorate the top with a matching ball. Knitted watermelon Christmas tree is ready! The Christmas tree is knitted of melange yarn - the stripes are obtained by themselves! Crocheted balls are decorated with beads. Here it's all about yarn, you don't need to sew or embroider anything additionally! Stylish knitted tree with a perky tail made of beads and beads on the top of the head. This knitted Christmas tree is decorated with embroidery and bows. This "night" Christmas tree is crocheted.Close a chain of 3 air loops into a ring and knit single crochet. To expand the cone, knit 2 single crochets in one loop. I do it "by eye".
Grass is embroidered with green wool along the bottom edge, stars are embroidered on top, yellow and colorless beads are sewn on.
"Baltic" Christmas tree: waves at sea, seagulls in the blue sky and dim "amber" sun. The Christmas tree is decorated with shells, real amber and amethysts. "Chamomile" Christmas tree is decorated with lace flowers and decorative beads.A knitted tree will decorate the New Year's table, delight friends, and bring you many pleasant minutes!
Preparations for the New Year holidays are in full swing now. Every time we gladly take out a box with Christmas tree decorations and our house is filled with a unique atmosphere of a fabulous celebration!
Let's replenish our collection of New Year's ideas and make a beautiful and soulful toy with our own hands - a fluffy Christmas tree. To complete it, you will not need a lot of time, or incredible skills and expensive materials, and our detailed master class will help you with your work!
So let's get to work!
We need:
a skein of green thread
crochet hook of the right size for them
sewing needle.
First row: we knit a chain of air loops of the required length (this will be the width of the base of the future tree). We have knitted 25 stitches.
Second row: we knit single crochet stitches in the loops of the previous row.
Third row (extended loops): we wrap the index finger of the left hand with a working thread clockwise ...
... and insert the hook into the column of the previous row. We grab the thread from the ball from the index finger and knit a single crochet. Remove the loop from the index finger. We repeat the steps by throwing on a new loop. 
Important: working with elongated loops, we knit purl rows. Starting each such row, insert the hook into the second column of the previous row (the second photo in the top row), and when ending the row, leave the last column untied (the first photo in the bottom row) .. Thus, a decrease in loops along the edges is formed, resulting in a triangle.
We knit two such fluffy triangles and sew them with a thread to match - we get a double-sided Christmas tree toy!
Little Christmas tree is cold in winter ...
The idea of clothing for the Podarёnka Christmas tree
Height 25 cm
Hook No. 2, acrylic yarn 300m / 100g, wire.
Legend:
sc - single crochet
Ssn - column with 1 crochet
Bp - air loop
Arr - 2 sc in one loop
Ub - 2 sc together
Extended hinges
Knitting Christmas trees
Christmas tree thread
2 p. - approx x 6 times = 12 sbn
4 p. - (2 sc, arr) x 6 times = 2 4 sc
5 p. - (3 sc, arr) x 6 times = 30 sc
6 p. - (4 sc, arr) x 6 times = 36 sc
7 p. - behind the back wall a row of sbn with extended loops = 36
8 p. - = 36 sbn
Cut the bottom out of cardboard or plastic, making a hole in the center for the wire
9 p. - = 36 sbn with extended loops
10 p. - = 36 sbn
11 p. - = 36 sbn with extended loops
12 p. - (10 sbn, ub) * 3 = 33 sbn
13 p. - 33 sbn with extended loops
14 p. - (9 sbn, ub) * 3 = 30 sbn
15 p. - 30 sbn with extended loops
16 p. - (8 sbn, ub) * 3 = 27 sbn
17 p. - 27 sbn with extended loops
18 p. - (7 sbn, ub) * 3 = 2 4 sbn
19 p. - 2 4 sbn with extended loops
20 p. - (6 sbn, ub) * 3 = 21 sbn
21 p. - 21 sbn with extended loops
22 p. - (5 sbn, ub) * 3 = 18 sbn
23 p. - 18 sbn with extended loops
24 p. - (4 sbn, ub) * 3 = 15 sbn
25 p. - 15 sbn with extended loops
26 p. - (3 sbn, ub) * 3 = 12 sbn
27 p. - 12 sbn with extended loops
28 p. - (2 sbn, ub) * 3 = 9 sbn
29 p. - 9 sbn with extended loops
30 p. - kill * 4.
We fill in the course of knitting, insert the wire, bend the tip at the top with a loop, wrap with thread the color of the tree.
At the bottom, we leave a longer wire-trunk + an eyelet in the boot for stability.
Boot and hat
Boot color thread
7 VP, 1 p. - in the 2nd loop from the hook, approx, 4 sbn, 3 sbn in the last loop, on the back of the chain 4 sbn, arr = 15
2 p. - 2 arr, 4 sbn, 3 arr, 5 sbn, arr = 21
3 p. - (1 sbn, arr) * 2, 4 sbn, (1 sbn, arr) * 3.6 sbn, arr = 27
4 p. - (2 sbn, arr) * 2, 4 sbn, (2 sbn, arr) * 3.7 sbn, arr = 33
5 p. - 6 sbn, arr, 8 sbn, arr, 6 sbn, arr, 9 sbn, arr = 37
6 p. - behind the back wall - 2 sbn, ub, 33 sbn = 36
8 p. - 9 p. - white color = 36 sbn
10 p. - boot color = 36 sbn
11 p. - 13 sc, dec, 2 sc, dec, 1 sc, dec, 1 sc, dec, 2 sc, dec, 7 sc = 31
12 p. - 2 sc, dec, 10 sc. dec, 2 sc, dec, 2 sc, dec, 7 sc - 27
13 p. - 12 sc, (dec, 2 sc) * 2, dec, 5 sc = 24
14 p. - 14 sbn, 2 kill, 6 sbn = 22
15-17 p. = 22 sbn
18 p. - white color = 22 sbn with extended loops
19 p. - white color = "step by step"
Insert the insole inside, loop the wire, stuff.
Wrap the visible part of the wire between the tree and the boot or tie it with a thread of the color of the trunk (brown, for example)
You can knit a circle - close, fill.
Circle
1 p. - 6 PRS in the amigurumi ring
2 p. - approx x 6 times = 12 sbn
3 p. - (1 sc, arr) x 6 times = 18 sc
Cap
18 VP in the ring
1 - 5 p. = 18 sbn
We make a pompom or a thick brush on the hat.
Happy New Year!