Recently, artificial wings have become a very, very relevant topic for photographic filming. You can easily find great ideas for photo shoots with wings made from dried flowers or maple leaves on the Internet. Well, the most aesthetic, the most beautiful are, of course, white wings, like those of an angel. If finances are available, then it would be ideal to purchase large, goose feathers. Depending on their size, we select the shape. You can create the wings of different birds, or even wings like a bat.
In addition to thematic photosets, the wings can become part of a children's costume for a masquerade or simply please the little Princess by complementing her elegant dress.
Advice
In order for this solution to be associated with a minimum of expenses, it is best to make the wings yourself. Moreover, there is absolutely nothing complicated about it.
We choose the necessary shape, as well as the dimensions for the wings. After that, we transfer the shape of the desired size to the base. The base must be strong and keep its shape so that your wings, subsequently, do not bend or sag like two rags.
White cardboard
For this, you can take, for example, white beer cardboard. However, since it will close with feathers, its color does not really matter. You can also use cardboard from the box from the equipment. Will be needed - 2 absolutely symmetrical parts. They will become wings. True, if these are wings for a small child, then it is possible to cut out one, single shape. You will also need a lot of paper feathers to cover 2 sides of each wing with them.
Feathers should be cut into three sizes, they will need to be sequentially stacked in three rows. And from the scraps, you can cut the smallest feathers, they, in the end, will need to lay out the edges of the feathers and block the glimpses at the base. All feathers need to be bent in order to give the wings volume with realism. It is also good to cut feathers from whatman paper, although it is possible to use almost any paper. For greater realism, you can combine paper and fabric. We start laying the feathers from the edge, but so that the previous one overlaps. The fastest, and at the same time effective method of bonding is hot melt adhesive. As soon as your first row is ready, start laying the second, although you can also glue through one. After the second comes the third row. Cut from scraps, tiny feathers overlap the remaining free spaces. The top of the wings is laid in exactly the same way, in the direction of feather growth. The same is done on the other side.
Elastic
To secure the wings, you will need a wide elastic band. It will be necessary to make special straps for the hands. For greater structural strength, it would be nice to make a hole in the base and fix the elastic on both sides. The attachment points are masked with feathers so that the feathers look like "alive". It is necessary to carefully fasten the parts together, glue them additionally with paper for strength and cover them with feathers for beauty. Be sure to calculate at what width and at what height the straps should be made.
Important!!!
You can create wings from thick cardboard, and then glue them with cotton wool and, if desired, decorate with sparkles. This design will require caution in use, but outwardly it is very effective.
Flying, paper wing
A flying wing made of paper floats beautifully in the air and is relatively easy to make. To do this, take an A4 sheet and simply bend its corners towards the center. They need to be folded down twice. Then you need to fold the flying wing in half and make bends along the lines, after which you need to bend the wings both in front and behind. Thus, your flying paper wing is ready. It must be launched gently, applying a little force. Alternatively, something similar can also be done using the origami technique. True, it is technically somewhat more complicated and will require skill. However, the result is definitely worth it.
Conclusion:
Wings can be made from thick paper, taken as a basis. And anything can become a decor - fabric, feathers and even cotton wool. Also, using origami paper, you can create a flying wing or a specific airplane - tailless. These toys delight the boys.
paper angel wings
How to make wings
DIY angel wings
The angel costume must be with wings behind the back. You can make angel wings with your own hands or buy them in a store, but it is best to make them yourself and choose exactly what your child likes. There are many ways and methods for making wings. They can be large, small, flat and voluminous.
Making angel wings with your own hands is not difficult at all. Of course, it is much easier to buy them in a special store, but why spend money if there is an opportunity to create such beauty on your own. To make a costume, you must have the following materials:
- cardboard;
- paper;
- napkins, preferably white;
- scissors,
- needle with thread;
- PVA glue;
- gum;
- feathers.
First of all, you should decide on the choice of the size and shape of the product and cut the workpiece. After that, stick white paper on it. To check the correctness of the calculation, it is recommended to try on an outfit for a child and understand the width based on which elastic bands should be attached. They must be sewn or pinned with a stapler. The place of attachment is sealed with paper.
There are many ideas and options for decorating an angel costume: for example, stick a synthetic winterizer on the wings. But a more economical option would be to tear the white napkins into small pieces and glue them to the wings. Some use pillow feathers instead of napkins.
To get started, you need to prepare the following items:
Large wings with feathers
According to the instructions, you can learn how to make large angel wings with your own hands. First of all, you need to do the following:
Feathers can be replaced with goose feathers, if possible, however, for the price it will be a little more expensive.
A simple paper version
You can use wire or cardboard and sheathe the structure with any fabric. Many people make paper angel wings with their own hands, using plain paper or cardboard. To make such wings, you will need to perform a number of actions:
Thus, it is easy and quick to make paper angel wings with your own hands.
More complex designs
Paper wings come in a variety of shapes and configurations. First of all, you need to determine what size the wings will be, and then proceed to manufacture:
This method is a little more complicated but the angel wings look great.
Cardboard is a great material for making angel wings and they are not difficult to make. To get started, you need to do the following:
- cut blanks for wings from cardboard and glue them together.
- Then glue it with a cloth or other material.
- Use ordinary napkins, fold them in half and then again.
- After that, glue them row by row so that they tightly overlap each other, and also lubricate parts of the wings with ordinary glue.
In the end, it remains just to stick them on the workpiece. It is worth turning on your imagination - and you can come up with a lot of interesting ways and choose the right materials for making wings. The process itself is simple, so it's best to do everything yourself than pay extra money and buy an angel costume in a store.
An angel costume usually consists of three main parts: a white dress for a girl (or a long white shirt for a boy), a halo and snow-white wings on the back. This outfit can be worn for Halloween or New Year's masquerade. But not everyone knows how to make an angel costume with their own hands.
Let's look at several options, and, based on the materials you have, choose how to sew an angel costume for your favorite angel.
Feather wings
So that your child can go to a New Year's party or Halloween as a real angel, make him wings from real feathers. They can be borrowed from any poultry farm or from a grandmother in the village.
We will need:
- copper wire in an insulating braid - 3 m;
- a template cut out from a newspaper;
- thin thick cardboard;
- any white fabric, but knitwear is better - 0.5 m;
- glue "Moment";
- large feathers of a white duck or chicken;
- downy feathers;
- downy boa or rabbit fur;
- double-sided tape and regular;
- scissors, pliers.
Work order
- We bend the wire around the perimeter of the template with pliers. Start at the base of the wing. Then you can use the remaining ends to attach the wings to your back.
- We cut out two wings from cardboard according to the template and attach them inside the wire frame with adhesive tape. Then we glue the white fabric cut out according to the same pattern with a hem allowance of 1 cm (4 blanks) on both sides.
- We glue down feathers around the perimeter, masking the wire frame.
- Glue the largest feathers in rows. They have smaller feathers.
- We decorate the top of the wings with fluff, covering the tips of the top row of feathers. Glue the boa. If you have pieces of white rabbit fur lying around, consider that its time has come. The wings are ready. Do not forget to sew on two straps so that the whole structure can be put on your back like a backpack.
foil wings
With these shiny silver wings you will conquer the whole Halloween. For feathers, you can take the usual tetra-packages metallized from the inside from under milk, juice or wine.
- To cut a feather, you need to fold the blank in half and cut out a crescent.
- Without unfolding, make a fringe.
- Cut out two wings from thick cardboard and paste over them with “silver” feathers on both sides, starting from the bottom.
- Fasten the wings together with wire and come up with a mount for your boy's back.
Very simple
I want to impress my friends on Halloween, but not everyone can collect so much foil, especially since not everyone has access to duck and chicken poultry farms. Now you will learn how to make an angel costume from ... cardboard disposable plates. You will have time to make this costume even if Halloween starts in two hours. It is clear that for this we need a lot of paper plates.
- Set aside three plates, and draw two symmetrical arcs on the rest. Cut the plate along these lines. Throw out the middle, the two extreme crescents will be our feathers.
- Divide the "feathers" into two equal piles and fold them in two fans as shown in the photo, fixing with glue along the edges of the plate.
- To hide the ugly ends, glue a second plate on top of them.
- Glue two straps and hide their ends under the third plate.
Light angel wings for your girl are ready, and she can wear them for Halloween.
Angel Costume Patterns
An angel can go to Halloween in any suitable dress, even in a nightgown. But if his wardrobe does not have such “angelic” clothes, we suggest sewing a dress according to the simplest patterns.
Since angels come in different sizes, the pattern is given conditionally. You can, for example, calculate the scale from the circumference of the chest and draw patterns. With a fabric width of 80-110 cm, you can calculate how much fabric is needed: 2 shelf lengths + sleeve length. With a width of 120 cm: front length + sleeve length. With a fabric width of 140 cm, one length of the dress will be enough for you, and the sleeves are cut out from the rest of the width.
Nimbus
Well, what is an angel without a halo?! It is very easy and simple to make it from copper wire. We also need a regular hairband.
- Make the halo itself first. Roll it from the wire, leaving the two ends hanging down on opposite sides. Decorate it with white fluff if you are going to Halloween, or tinsel if you have a New Year's party ahead of you.
- Attach the two ends of the wire to the hoop and mask them with white tape. So the costume for your angel is ready.
To be the center of attention at a costume party and catch admiring glances, you need a chic costume. An excellent option would be the image of an angel with large beautiful wings. Such wings are often used for photo shoots. You can also dress up a child in a costume of a little angel for a festive matinee in kindergarten. This article contains angel wings templates and several workshops on how to make angel wings with your own hands.
Templates and materials
Such a beautiful detail of the image of an angel can be made from all kinds of improvised materials. The basis for them is most often made of cardboard. Then the cardboard is decorated with materials that look like feathers. Elastic bands are attached to the back of the wings to make it comfortable to put on the shoulders.
Another option for the base is a rigid wire frame. It is bent into the desired shape and covered with elastic fabric. Then they also decorate the base.
By connecting fantasy, you can come up with an original base decor. The main thing is that the weight of such wings should not be too large.
Templates can be of simple form. The main emphasis is on the feathers themselves.
Or a multi-layer openwork pattern is cut out, the shape of which looks like almost finished wings.
The most natural decor is, of course, feathers. You can buy a boa, glue the feathers from it to the template.
In feather pillows, you can choose light feathers, smear the template with glue and pour feathers on it. They stick well and quickly.
You can also ask people who keep pigeons, but they are unlikely to have the right amount.
Therefore, they make an imitation of feathers from satin fabric, paper, tracing paper, cardboard, fabric ruffles, napkins and other improvised materials.
Feather wings
Let's create a classic version of feather wings for an angel costume. These wings are perfect for a small child.
For the manufacture of wings, it is necessary to prepare plastic, a piece of chintz, transparent glue, feathers, elastic bands.
Cut out a wing template from plastic folders. Glue the chintz on the plastic, also cut according to the pattern. You can make a wire frame and stick calico details on it. The effect will be the same. At the base we make two holes and insert the rubber bands. Before making holes, the wings must be attached to the back and mark the location of the holes.
We glue the edges of the wings with feathers so that the wire frame is not visible.
We sort the feathers by length and glue them in rows from bottom to top, from long to short.
We glue the edges at the top with down feathers.
Very realistic wings are obtained.
We make fabric
Wonderful wings are obtained from fabric ruffles.
Let's prepare cardboard, paper for gluing the back of the wings, elastic bands for fastening, glue and circles of fabric, tape for connecting the wings.
Cut out a template from cardboard.
According to the template, cut out the details from paper with a margin along the edge.
Glue paper over cardboard. We make holes and insert rubber bands.
We take circles of fabric in the center so that soft uniform folds form.
Starting from the bottom, glue the fabric to the cardboard base.
Get fluffy wings.
We fasten them with a ribbon, and the fabric angel wings are ready.
Another master class of fabric wings. Light and airy wings are obtained from organza.
For their manufacture, you will need a hard wire, nylon or tulle, organza, scissors, threads, a needle.
The frame is made of wire.
The frame is sheathed with tulle or nylon mesh. We fasten the parts with wire, which we also glue. We put wide elastic bands on the connection, which will be worn on the shoulders.
Strips are cut from organza, and a fringe is cut from one edge. The strip is folded and sewn to the frame, starting from the bottom.
You get tender airy wings.
paper product
Huge angel wings can be decorated with paper feathers.
For work, we need to prepare a simple cardboard for the base, paper, nightlights, glue and rubber bands.
A template of the desired size is cut out and transferred to thick cardboard.
The diagram shows the principle of gluing feathers of different sizes.
Cut out a lot of feathers and bend them lengthwise.
Glue the feathers in rows.
We make two holes on each wing. We insert rubber bands into them. Mask holes with feathers.
Fasten the wings. We also mask the junction.
When finished, they will look like this.
tissue paper wings
Delicate and airy angel wings are obtained, decorated with napkins.
To create them, you need a ceiling tile. It can be replaced with cardboard pasted over with paper. We will also prepare white napkins, scissors, an awl, rubber bands, glue.
Cut out the wings according to the pattern. We make holes in them for attaching rubber bands.
We pass rubber bands through the holes.
Fold white napkins into an accordion. Cut out the feather.
We unfold the napkin and get a few feathers.
We glue the feathers from the bottom up, overlapping the top row to the bottom.
After all the feathers are glued, we deform the tips of the feathers quite a bit. We do it carefully so as not to damage them. This will give the wings a natural look.
It turns out such wonderful fluffy angel wings.
Video on the topic of the article
In a selection of videos, you can draw inspiration and learn how to make angel wings in different ways.
And you think who to dress up? We invite you to play the role of an angel. It is not difficult to transform into this image. The costume is also quite easy to make. You will surely find a white robe among the things of your wardrobe, but we will teach you how to make wings. This article presents three master classes for making this attribute. Study them, choose the one you like best, and start the creative process.
We make white angel wings from improvised means. Preparation stage
This model is made from the most affordable materials listed in the list:
- A3 cardboard (2 sheets);
- White paper;
- white napkins;
- wide elastic band (about 2 meters);
- feather.
In addition, you will need a thermal gun, scissors, a pencil, a stapler for work.
Instructions for making angel wings for a fancy dress from napkins and feathers
On paper, draw a sketch of the wing, the size you need. Cut out the template, transfer it to cardboard. Perform two such details, symmetrical to each other. Cover both sides with white paper. Next, try on the product to the back and outline the places where the elastic bands will be attached. Keep in mind that the distance between them should be equal to the width of the back. Sew them to cardboard blanks or pin them with a stapler. Seal the attachment points with white paper patches. Now proceed to the design of the product. Glue the wings of an angel with a thermal gun along the edges with white long feathers. Decorate the remaining space with napkins. How to do it? Apply PVA glue to the entire surface of the wing. Crumple the napkin and place it on the piece of cardboard. Thus design the entire product. Wrinkled napkins are very similar visually to fluff. Wings made in this way look very believable. Leave the craft to dry at room temperature. Press it along the edges (where the feathers are attached) with hard objects. When performing this step, be careful not to crush the napkins. After the attribute of the carnival costume dries, it can be supplemented with decorative elements: rhinestones, beads, acrylic painting.
Fantasy has no limits! Paper utensils - the basis for the manufacture of attributes for a masquerade
You can make original and beautiful angel wings with your own hands (photo confirmation of this) from such material as disposable cardboard plates. What do we need to work? We study the list of materials and tools:
- paper plates (small);
- marker;
- scissors;
- thermal gun;
- satin ribbon 2.5-4 cm wide.
Preparation method
On eight plates, mark lines in the form of a crescent on both sides with markers. Cut them along these lines. As a result, you will get sixteen "crescents" and eight ovals with sharp corners. Set aside the last details, they will not be needed in the work. When doing this procedure, remember that all the "crescents" must be the same size and width, so follow them in one pattern. These wedges will later serve as feathers on the product. Continue to make angel wings with your own hands like this: put a whole cardboard plate upside down in front of you, put eight blanks cut into wedges on it on each side in the form of a fan. Glue them on with a heat gun. Attach another one of the same whole disposable plate on top. Next, make ribbon straps. Glue its edges to the wrong side of the product. You can see the final version of this craft in the photo. Each of you can make such original angel wings with your own hands in just an hour.
We use scraps of white fabric
Namely, its main detail - wings, can be made very quickly from thin textiles. To make them, you will need the following materials: white fabric (cotton, linen, silk), thread and needle, stapler, cardboard, scissors.
Want to learn how to make such an attribute of a fancy dress? Then study the description.
Follow the template and cardboard base as described in the first version of the product. Next, cover the blanks with a white cloth, secure it with a stapler. Tear the other piece of textile into long strips 3-5 centimeters wide. Gather them with stitches on the thread along one edge and pull them together slightly, forming a frill. Pin the resulting fluffy detail on the wing horizontally with a stapler. Thus, decorate the entire front side of the product. Angel wings, made by hand in this way, are voluminous and very beautiful. The torn edges of the fabric are associated with feathers and down and look very natural on such an accessory.
Conclusion
The article presents to your attention three ways to make such an element to create the image of an Angel, like wings. We hope that some of them will definitely come in handy in preparation for the next carnival.