Knit sneakers Seamless lesson 162. Knitting of cute children's slippers for home

A person for happiness needs the smallest of personal time. So I want to come home, to relax a little in a warm home atmosphere, feel all comfort at home. It is the home slippers give a person such unforgettable feelings of peace. Any needlewoman can tell how to tie homemade slippers with their own hands. Such work will not just bring the pleasure of the master, but also will be able to please the relatives and loved ones.

Preparation for work

For work it is necessary to prepare threads that you have already chosen. Spokes choose such as we prefer, its size depends on the spokes.

Most often, thick spokes are chosen for soft air slippers, and the knitted knitted spokes are suited for dense everyday.

Carefully choose threads. They should not lift, dress, pull out. Let some synthetics be added to the yard, and then they will be practical in the sock. Select the decoration and decor, then the pleasure of work will be accurate. With good preparation, a beautiful product is created with great pleasure in a short time.

Creating slippers knitting

Women who know how to work with the needles, give preference to work with them, as the product is performed quickly and has a simple unrivaled view. Easy to work with insoles, besides, slippers will remain a beautiful view. So today knit slippers with knitting needles. If there are doubts about the product size, it is easy to calculate thanks to a simple table:

Knitting technique slippers

And now the schemes of knitting of domestic slippers will be presented in more detail. In order to get pretty slippers for 36 leg size, you need to dial two loops with needles and penetrate two centimeters by the facial or by an invalid viscous. Next, you need to divide all the loops into four parts. Twenty loops to lie down and further, and let them remain on the knitting needles.

We continue to work with the middle. If you wish and change the image of the product, try changing the color of the cluster or choose another picture. The nipper continues until the little finger closes at all.

Cut the end of another thread and start knitting the color you started. From the very edge of the resulting piece, type twenty-five loops. Start work on its formation. You need to knit those rows that did not finish until four loops remain at all. Then, on the other edge of the rectangle, pick up loops.

Knit about eight rows, to create a height slipper for foot.

Thus, knitting is almost completed.

Important! Before close the loops, put the product on foot and look at whether all parts of the body are closed.

If you make sure that everything coincided, then feel free to cover the loops. If the gaps remained, then they are still a couple of rows. Next should work on the assembly of the product. Sefers prepared before the workpiece, sew on the stack. So it turned out beautiful and warm slippers.

A variety of socks

But another modern version and scheme for creating slippers, which are very similar to socks, but they are denser and warmer.

This option is very practical and quickly knit. Work begins with a mating sock up, will be without a seam. We consider how many loops are needed for foot. From the resulting number we are determined with the number of loops. Additional thread helps to connect the yarn.

Half the necessary loops put on the needle. To lines the first row and a number of invalid. The last loop is always easy to remove. Knit until one third leaves from the loops. The next step is the rise of working loops. It is necessary to be knitted on the same loop in the following rows. Thus, check until all the loops become workers. This is how the sock is created.

Return to hinges that are fixed with thread. Transfer the rest of the hinges on the right spoke. It takes out neatly unnecessary thread. Further knives the front first loop from auxiliary thread, the loop is removed behind it and the thread turns out before it. Then everything is done in a circle.

On the subsequent number you need to remove the first loop, then facial, invalid and change to the end of the row. The first half of the loops is written in the first row, and the second one in the other. Thanks to this, it turns out a pipe.

When slippers become long enough, you need to start raising the heel. For an extra needle you need to remove the loops through one. The remaining loops knit as for the sock. Check out a little bit and start the mating gum: one to remove, one facial, thread before work, invalid, remove, thread before work. Finish when the height of the gum will satisfy.

Knitting tracks

More craftsmen very much like knitting tracks. Moreover, fit very easy and fast. You must dial loops, the calculation can be done on the table above. We are tied with front loops of two or three rows and begin to make the heel. We work with two spokes, knit the heel. Slip two loops to form a wedge heel. When you close the side loops, you need to dial the edges and knit in a circle. Knit to the desired length. We reduce the loop, and the remaining need to pull the thread. Decorate the words at your request.

Video on the topic

Knitting on the needles for younger schoolchildren

The audience: The master class is intended for classes with third-class schoolchildren.

Knitting "slippers". Master Class

Purpose: Tie slippers.

Tasks: instilling aesthetic taste; develop motility, eye meer; Relieve accuracy.

Structure occupation

Riddle:

Merry brothers live in the hallway

Related guests are looking forward to.

Such fluffy paws -

Cozy, soft ... Slippers.

Without this shoe can not do neither old nor young. Comfortable, soft, warm home slippers give us comfort and rest after troublesome day. Slippers can be tied with their own hands. They knit on two spokes with a solid cannol and then stitched. This work will not take much time.

Step-by-step process

1. To work for work: yarn, knitting, threads, scissors, buttons.

2. Sole: dial 26 loops.

3. 1 row - knit all the loops facial for the rear walls.

4. 2 row and all-purpose rows - knitting all loops facial for the front walls.

5. 3 row - knit loops facial, at the beginning and at the end add one loop at the end. Figure 5A: Pick up the horizontal loop with the needle, pull and penetrate. Figure 5B: The next loop knives at will: you can for the rear walls or for the front. On the spoke of 28 loops.

6. 5 - 14 rows - repeat the rows 3 and 2. on the spoke of 38 loops

7. 15 and 16 rows - knit facial loops.

8. 17 row - knit facial loops, at the beginning and at the end of a row to check 2 loops together by the facial. On the spoke 36 loops.

9. 19 - 28 Rows - repeat the ranks of 17 and 18. On the spoke of 26 loops.

10. Up: We continue to knit 28 row: to dial 8 loops - these are hinges heel. On the spoke 34 loops.

11. 29 row and all odd rows - knit facial loops.

At the beginning of a row add 1 loop. On a spoke 35 loops.

30 row and all knowing rows - knit facial loops.

12. 31 - 39 Rows - repeat the rows 29 and 30. On the spoke of 40 loops.

13. 40 row - close 18 loops and knit facial loops.

14. 41 row - knit with hinges.

42 row - knit facial loops.

15. 43 row - knit with hinges and dial 18 loops.

44 row - knit facial loops. On the spoke of 40 loops.

16. 45 Row - knit facial loops, at the beginning of a row to plug 2 loops together by facial. On the spoke of 39 loops.

46 row and all knowing rows - knit facial.

17. 47 - 55 Rows - repeat the rows of 45 and 46. On the knitting of 34 loops.

18. 56 row - close the loops.

19. The first canvas is ready.

20. Take a button and sew.

Knitted slippers - universal training for the house, which is nice to wear on their feet. In such slippers, warm, comfortable and very cozy. New models of knitted slippers are pleasing to their simplicity and accessibility.. You can independently associate this cute accessory, pick up a high-quality yarn and original design.

There are knitted slippers on the sole and without it, seamless slippers, socks, socks, boots, moccasins, and even sandals. Next, we will tell you how to link cozy home slippers with knitting needles, we will demonstrate several schemes and master classes.

Handmade slippers are a present gift for your legs, especially if you went a lot throughout the day. Knitted things always stay in fashion: they are exclusive, beautiful, and most importantly - suitable exactly to you, in size and style. Consider more Slippers with knitting needles: Schemes and descriptions, simple and beautiful models knit craftsmen around the world, it is under the power and you.

This model fit easily and quickly, ordinary sweating. In contrast to the tracks, such slippers are raised up to the ankle, so it is better to warm the leg.

Slippers homemade with their own hands to tiewithout a seam on 5 knitting. This method is very similar to the process of knitting socks, with the main stages of work you will be helped to cope with pictures and step-by-step instructions.

Prepare 5 spokes, thickness 4 mm.
Middle thick yarn.
The mating density will be 10x10.

Instructions for knitting seamless slippers

Dial 32 loops on the knitting needles.
The first row knit facial.
The second row knit like this: 10 facial loops, one inequate, 10 facial, one invented, 10 facial.
The third row knitted how to bet.
The fourth row is similar to the second.
From 16 rows begin to form heel: 10 facial, one outfit, 10 facial, then 2 invalid knit together (for the central heel).
In 16 row, we take one loop of the side and turn the work.
In the 17th row, the first loop remove, Knit 10 loops of the facial, the twelfth loop of the central part of the heel remove, and the first side part knit facial. The removed loop is moved to the opposition.
We repeat the knitting 16 and 17 rows, with the addition of two side parts of the heel. In the involving rows, the last penetration of the central part of the heel and the first side - knit together with the purl.
In the front rows - to remove the last penetration of the central part, without sticking, and the first loop of the side part knit facial. The removed loop is transferred to the closed.
On the needle - 12 loops of the central part of the heel. Next, we type 10 kettles on the edge of the side part.
Turning the work on the other side, knit the loops of the side and central part. We need to score another 10 loops on the edge on the other side of the heel. Thus, on three spokes we get 32 \u200b\u200bloops.
Knit facial. The invalid rows knit like this: 10 facial, 1 wrong, 10 facial, 1 wrong, 10 facial.
Face rows knit facial.
Knitting continue to the bone on the leg, at the end of the facial row, they recruit 8 loops, closing knitting in the circle.
Distributing loops for 4 spokes, Knit in a circle, using a handful mating to the closure of the maiden.
For knitting socks, moving to the facial.

On the first spoke - One facial, then remove one facial, let's knit front and throw a removal loop on it. Next, knit facial.
On the second spice - All facial loops until there are 3 loops (2 of them knit together face, one-facial).
Loops on the third needle Knit, as on the first.
On the fourth - as on the second.

Knit sock, for this it is necessary to first cut the loops through the row, and then - in each row until the 2 loops remain on each needle. All loops must be connected. And then add the needles parallel to each other and remove two knitting needles together. The last loop is stretched inside and fixed by a nodule.
Optionally, make Pompon slippers.

Slippers of such a model are tightly sitting on the foot, reminding the track or dense socks.

Knitted slippers with fasteners Very stylish look at the leg - in such cute ballet shoes you can even dance!

Beautiful and neat shoes shoes Decorate and warm your legs.

Knitted boots - Another kind of cozy home slippers.

Knitted home slippers Mastery both on the sole and without it.

Knitted slippers for children are often called booties. They are put on babies on a walk and at home.

Men's slippers are also in trend, just not all men admit that they have this accessory.

Short master class on knitting slippers knitting It will help you to figure out all the nuances of creating this warm accessory with your own hands.

If you want to master the knitting slippers with knitting needles step by step, the video on two spokes will explain to you the process in all details and details.

Soft and warm slippers for home can be associated independently. Like knitting slippers with crochet and work with knitting needles. It will take a little time: you can sit on the sofa with needlework while watching your favorite TV series, and to its end you will have a ready-made new thing.

Variants of knitted home slippers

The easiest option is to knit slippers with two knitting needles, and it will be necessary to be able to knit with a canvas with a handful viscous and rubber band 1 x 1. If you want to complicate the work, you can choose other options:

slippers with a pattern;
slippers from squares;
"Slaves";
Slippers and other options.

Color, knitting drawing You will select yourself, we will only give the most detailed instructions for knitting slippers for beginners.

We need yarn and needles for work. Their diameter will depend on the thickness of the yarn. If you take the yarn of the middle thickness, the spokes number 4 is better.

You should not take too thin yarn, but in thick sneakers, it is unlikely that your legs will be comfortable, except that it is in winter.

How to tie slippers with your own hands

Type 34 loops on the knitting needles, check the first row facial. In the second row after the edge, tie 10 loops facial, 1 out., 10 persons., 1 out., At the end of 10 facial and edge.

From the 3rd to the 34th rows, knit on the drawing: all odd rows of facial, even - as the 2nd row.

In the 35th row, make an increase, knit 11 loops facial, then from 1 loops, check 2, 8 facial, out of 1 loops 2, 11 facial and edge. 36th row: 10 facial, 1 out., 12 facial, 1 out., 10 facial, edge. The next row is all facial.

The 38th row and all even rows to the 63rd row knitted as the 36th, odd - facial loops.

Then 9 rows are tied by a rubber band of 1 x 1 (1 individuals., 1 out.), Loops do not close.

It remains to tie the second sneakers and collect both. First you need to stretch the remaining tail through the unlocked loops of the last row, pull, fasten the thread. The part and 8 more rows are sustained (it will be toes).

For the formation of the heel, it is necessary to find the middle of the first row from which knitting was started. Starting from here, you need to sew a middle part of the heel with a neat seam. Secure the thread and decorate the slippers: you can make an embroidery with bright threads or arrange a pompon, tie the bulk flower with a crochet.

In the same way, knitting slippers on the felt sole: after the end of the work, the sole to the finished sneaker, and the place where it is sewn can be hidden under the decorative seam.

Slippers for 5 spokes without seams

Such slippers can also associate an inexperienced needlewoman. Prepare 5 spokes number 4 and yarn of medium thickness.

Scheme and Description for knitting slippers:

Type 32 loops on the knitting needles and check, as in the previous case, the first row of facial loops.
The second row knit like this: after the edge 10 persons., 1 is broken., 10 persons., 1 out., 10 persons.
3rd and 4th rows - in drawing and so until the 15th row.

Now form the heel. For this, the 15th row knit like this: 10 persons. (Side), 1 is broken., 10 persons., 2 together is broken., Turn the job. In the 16th row you need to knit in the drawing, then attach 1 side loop and turn work.

In the 17th row, only the central part (12 loops) fit with the joining the loops of the side of the side: 10 persons., 1 remove and throw it on the side loop, which is lying on the front, in the following rows to repeat the 16th and 17th Rows until 12 facial loops remain on the needle.

Type 10 loops over the side of the side, expand the knitting, check the scored and central loops, type 10 loops over the sideline. Check yourself: on the knitting needles there should be 32 loops, as at the beginning of knitting.

Knit to form the formation of the figure:

Facial rows - facial loops;
Pouring - 10 persons., 1 izn., 10 persons., 1 out., 10 persons.

So you need to continue knitting, trying on it on the leg: when knitting will close the bone of the thumb, we translate work for 4 knitting needles, distributing the loops evenly.

Before the little finger hits, knit sweating, then close the thoughts with a bustling knitting:

On the first spin knit: 1 persons., 1 remove, 1 individuals., Removed the loop to cross the latch. The remaining loops knit facial.
On the second spice - 2 persons. Together, 1 individuals., 2 persons. Together, 1 individuals. etc.
The loop of the third knitting needles like on the first.
Fourth - all facial.

It is necessary to continue the accumulation while there will be no two loops on the knitting. We connect them, check for 2 together. Through the last loop, we stretch the thread and hide it inside.

As you can see, the work is simple, and than to admire the photo of knitted slippers on the Internet, it is better to try to associate them yourself, and then warm the legs in a beautiful home shoe.

Stock Foto Slippers knitted

Yarn: 200 m / 100 g Flow yarn: 70. Tools: Spokes No. 3.5, knitted needle. Patterns: Riding knitting knitting density: horizontally pg \u003d 1.85, vertical PV \u003d 3.75 Size: 37 (24)

I bring to your attention a master class on knitting slippers with knitting needles. Simple tracks and slippers knit needles on the line by turning rows. Knitting scheme is very simple and forces even beginners. Slippers are very comfortable and cozy. For example, I will connect slippers for 37 size, the length of the feet of 24 cm. You also get acquainted with the method of calculating the loops to any size. The basis of the calculation takes 1/4 of the foot length. Therefore, slippers are called quarters.

Video knitting slippers at the end of this page

High heel provides a comfortable fit on the leg

Sequence of work

The sequence of work is as follows: First, knit the front part of the plank and the thoughts (in the photo of the pink yarn), then the side (gray) and the sole, which goes into the heel and the back of the plank (yellow).

Calculation of loops

To calculate the loops, it is enough to know only the length of the foot. In my case, it is 24 cm.

We recruit on the needles The number of hinges is equal to 3/4 of the foot length multiplied by horizontally. The resulting number is rounded to the number, multiple 3 (the number that is divided into 3) is obtained:

(24: 4) x 3 x 1,85 \u003d 33.3 ≈ 33 loops.

Tough in length It is half the length of the foot, in my case - 12 cm. The resulting magnitude to multiply on the knitting density vertically, rounded to the even number and obtain the number of rows. Taking into account the stretching of the canvas, I will round down in a smaller side.

(24: 2) x 3,75 \u003d 45 ≈ 44 rows.

Side part Makes 1/4 foot length. To determine the number of rows to be associated, multiply this value to the vertical knitting density and rounded to the even number.

(24: 4) x 3,75 \u003d 22.5 ≈ 22 rows.

As you can see, the calculation of the loops for this model is very simple.

Important: This calculation algorithm is suitable for sizes from the smallest child to medium female (length of the foot 24 cm or 37 shoes size). For greater foot length, use the numbers specified in the table.

Progress

Associated front part of the plank and thoughts

Go to knitting the side part. Knit 11 loops of the Misk, then raise the loops from the edges on the left (22 loops), taking their face loop, picking up the edge loops over the wall facing the front side of the work. T. K. Knit bilateral, it is convenient to note the front side by the marker. I turn over the work on the wrong side and continue to knit with a handful. Right loops raise from the edges as well as on the left.

The side of the slippers is connected

In the next facial row, we proceed to knitting the sole. To do this, we will pronounce only 11 loops of the central part (on the left and right side, at the same time there will be 33 loops), connecting the loop of the side parts. For this B. The end of the front rows last, 11th loop knit together with the loop of the side . In the involving rows, we will see together the 11th loop of the central part and the lateral loop . The first loop of the row is removed not accused. Thus, we have neat pigtails along the fitting line of the sole on the right and left. In total, we tied up 66 rows of soles and attached 33 loops from the other side. 11 loops remained on the knitting.

Now you need to tie the heel, connecting the edge loops on the sides. To do this, the last two loops of the row knit together face loop with a slope to the left, and the edge loop to the facial loop. We pick up the wall of the edge loop facing the front side. The first loop of the number is not removed, as usual, but insert the face loop. So we join all the edge hinges heel. . Slippers are ready.